Ricoh SP4510SF User Manual

When You Have Problems Operating the
Machine
This section describes common problems and messages. If other messages appear, follow the
instructions displayed.
Problem Causes Solutions
The [Facsimile] or [Scanner]
icon does not appear on the
[Home] screen even though
the copier screen appears
when the machine is turned
on using the main power
switch.
Functions other than the
copier function are not yet
ready.
Functions appear on the [Home]
screen when they become ready for
use. Time required varies by function.
Wait a little longer.
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
Functions other than the
copier function are not yet
ready.
Functions appear in the User Tools
menu when they become ready for
use. Time required varies by function.
Wait a little longer.
The lamp remains lit and the
machine does not enter
Sleep mode even though the
[Energy Saver] key was
pressed.
• The ADF is open.
•
The machine is
communicating with
external equipment.
•
The hard disk is active.
• Close the ADF.
• Check if the machine is
communicating with external
equipment.
• Wait a little longer.
The display is off. The machine is in Sleep
mode.
Press the [Energy Saver] key or the
[Check Status] key to cancel Sleep
mode.
Nothing happens when the
[Check Status] key or the
[Energy Saver] key is
pressed.
The main power switch is
turned off.
Make sure the main power indicator is
off, and then turn on the main power
switch.
When You Have Problems Operating the Machine
157

Ricoh SP4510SF Specifications

General

Brand	Ricoh
Model	SP4510SF
Category	Copier
Language	English