5. Print
This chapter describes frequently used printer functions and operations. For the information not included
in this chapter, see Print on the supplied CD-ROM.
Quick Install for USB
You can install the printer drivers easily from the CD-ROM provided with this machine.
Using USB Quick Install, the PCL 6 printer driver is installed for use with a USB connection with the
printer.
• Manage Printers permission is required to install the drivers. Log on as an Administrators group
member.
1. Quit all applications. (Do not close this manual.)
2. Insert the provided CD-ROM into the computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click [Run SETUP.EXE].
3. Select an interface language, and then click [OK].
4. Click [USB Quick Install].
5. The software license agreement appears in the [License Agreement] dialog box. After
reading the agreement, click [I accept the agreement.], and then click [Next].
6. Select the method to install a printer driver, and then click [Next].
7. Select the machine model you want to use, and then click [Next].
8. Make sure the machine is turned off and not connected to the computer, and then click
[Next].
Wait for a moment until file copying is complete.
9. Connect the machine and the computer with a USB cable, and then turn on the machine.
The auto-detecting starts.
To cancel the auto-detecting, click [Stop Auto-detecting].
10. In the confirmation dialog box, select [Yes] if you want to use the machine as your default
printer.
11. Click [Finish].
When you are prompted to restart your computer, restart it by following the instructions that
appear.
12. Click [Exit] in the first window of the installer, and then take out the CD-ROM.
91
To Next Page
Loading...
Need help?
General
