RIGOL
DS6000 User’s Guide XIX
Document Overview
Main Topics of this Manual:
1 Quick Start
Describe the preparations before using the instrument and generally introduce the
instrument.
2 To Set the Vertical System
Introduce the functions of the vertical system of the oscilloscope.
3 To Set the Horizontal System
Introduce the functions of the horizontal system of the oscilloscope.
4 To Set the Sample System
Introduce the functions of the sample system of the oscilloscope.
5 To Trigger the Oscilloscope
Introduce the trigger mode, trigger coupling, trigger holdoff, external trigger and
various trigger types of the oscilloscope.
6 To Make Measurements
Introduce how to make math operation, cursor measurement and auto
measurement.
7 Protocol Decoding
Introduce how to decode the input signal using those common protocols.
8 Reference Waveform
Introduce how to compare the input waveform with the reference waveform.
9 Pass/Fail Test
Introduce how to monitor the input signal using the Pass/Fail test.
10 Waveform Recording
Introduce how to record the waveform as well as play back and analyze the recorded
waveform.
11 Display Control
Introduce how to control the display of the oscilloscope.
To Next Page
Loading...
Need help?
General
