Rockwell Automation Publication 750-PM101B-EN-P - April 2022 5
Preface
This publication contains the basic information to start up and troubleshoot
PowerFlex® 750T Products with TotalFORCE® Control, firmware revision 10
and later.
Firmware revisions 6 and earlier are documented in the PowerFlex Drives with
TotalFORCE Control Programming Manual (firmware revision 6.xxx and
earlier), publication 750-PM100
.
This publication is intended for qualified personnel.
• You must understand the hazards that are associated with
electromechanical equipment installations.
• You must understand and follow all applicable local, national, and/or
international electrical codes.
• You must be able to program and operate adjustable frequency AC drive
devices.
• You must have an understanding of the parameter settings and
functions.
Summary of Changes
This publication contains the following new or updated information. This list
includes substantive updates only and is not intended to reflect all changes.
Translated versions are not always available for each revision.
Access Fault Codes and
Parameter List
Download Firmware, AOP,
EDS, and Other Files
Download firmware, associated files (such as AOP, EDS, and DTM), and access
product release notes from the Product Compatibility and Download Center at
rok.auto/pcdc
.
Topic Page
Parameter descriptions and fault, alarm, event, and exception codes are now available in
separate publications.
5
Added information on when the Set Defaults operation for a peripheral device also resets the
host product.
100
PowerFlex 755TS drives added to Fan Usage by Product section 100
Reset as Shipped procedure clarified. 112
Added information on the Recovery Mode function. 113
Added information on the Secure Erase function. 114
Added Appendix A - Permanent Magnet Motors listing. 119
Additional Resources table lists new parameter descriptions and fault, alarm, event, and
exception code publications and PowerFlex 755TS product publications.
127
This manual links to PowerFlex Drives with TotalFORCE Control
Parameters Reference Data, publication 750-RD101
, for parameters
and PowerFlex Drives with TotalFORCE Control Conditions Reference
Data, publication 750-RD102
, for fault, alarm, event, and exception
codes. Download the spreadsheets for offline access.
To Next Page
Loading...
Need help?
General
