Rockwell Automation Publication 750-PM101B-EN-P - April 2022 19
Chapter 2 Parameter Organization
Port 1 HIM on Control Pod
The Human Interface Module (HIM) on the control pod connects through
port 1.
Port 2 HIM (Door Mount or Handheld)
A second HIM or 1203-USB programming interface connects through port 2.
The factory installed door-mounted HIM connects through port 2.
Port 3 HIM or 1203-USB
A third HIM or 1203-USB programming interface connects through port 3.
Port 3 is visible when using a 1203-S03 splitter cable.
Port 4...8 Option Slot
Ports 4...8 are the DPI and DSI option slots. I/O, feedback, communication,
and functional safety option modules can be installed in these option slots.
Predictive Maintenance For firmware revisions 10.xxx or later, the remaining life of components with
predictive maintenance appear on the Predictive Maintenance page in the
Device Details window in Connected Components Workbench software and
the Drive Details window in Studio Logix 5000 Designer application.
Figure 2 - Connected Components Workbench - Predictive Maintenance Page
Predictive Maintenance objects and instances are listed in the
PowerFlex Drives with TotalFORCE Control Parameters Reference
Data, publication 750-RD101.
To Next Page
Loading...
Need help?
General
