Rockwell Automation Publication 750-PM101B-EN-P - April 2022 7
Chapter 1
Overview
Parameter Descriptions TotalFORCE control parameters are listed in the Microsoft® Excel®
spreadsheet publication that is available on at rok.auto/literature
.
To view the parameter descriptions and for full functionality (filter and
search), open the file in the Microsoft Excel application.
Startup Information See the PowerFlex 750-Series AC Drives with TotalFORCE Control Quick Start
for detailed startup The procedure in this Startup chapter is designed to guide
you through the 12 basic steps that are required to start up your PowerFlex®
750-Series product with TotalFORCE control for the first time for simple
applications.
CIP Security CIP Security™ is a standard, open-source communication mechanism that
helps to provide a secure data transport across an EtherNet/IP™ network. CIP
Security lets CIP™-connected devices authenticate each other before
transmitting and receiving data.
CIP Security uses the following security properties to help devices protect
themselves from malicious communication:
• Device Identity and Authentication
• Data Integrity and Authentication
• Data Confidentiality
Rockwell Automation uses the following products to implement CIP Security:
• FactoryTalk® Policy Manager software (includes FactoryTalk System
Services, version 6.20 or later)
• FactoryTalk Linx software, version 6.11 or later (lets workstation software
communicate securely using CIP Security)
• Studio 5000 Logix Designer® application, version 31.00.00 or later This
application is required to interface with CIP Security-enabled Logix
controllers. The minimum application version varies by controller
product family.
Use this link to access the PowerFlex Drives with TotalFORCE Control
Parameters Reference Data, publication 750-RD101
, for parameters.
Download the spreadsheet for offline access.
To Next Page
Loading...
Need help?
General
