Rockwell Automation ARMORSTART User Manual

20 Rockwell Automation Publication 280E-PM001A-EN-P – August 2011
Chapter 2 ArmorStart
®
EtherNet/IP
™
Communications & Control Programming Manual
Internet Protocol Tab
Click on the Internet Protocol tab to display the following:
If the IP address was set up using the Rotary Network Address Switches, default
settings for the IP would already be established and you will not be able to make
any changes in this tab. In most cases, you would not need to make any changes in
this tab and it will only display the current IP Settings Configuration.
Port Configuration Tab
Click on the Port Configuration tab to display the following:

Rockwell Automation ARMORSTART Specifications

General

Brand	Rockwell Automation
Model	ARMORSTART
Category	Controller
Language	English