Recording
Backing Module BK-7m
r
47
Listening to your recording
If you selected (a) or (b) above, you can listen to your
recorded performance:
1.
Press the [START/STOP] button to start play-
back of your recording.
If your recording seems too loud or too soft, you may
want to change the setting of the “REC Audio Level”
parameter ([MENU] button ‰ “Global“‰ “Utility”‰
“REC Audio Level” on p. 64).
Note: The BK-7m provides a second recording mode that
allows you to start recording before the song you selected
([MENU] button
‰ “Global“‰ “Utility”‰ “REC Audio Sync”
on p. 64
).
Saving your recording as an audio file
When you stop recording (see above), the display shows
the following message:
NOTE
The name suggestion displayed here depends on the first
recording. It will, however, be followed by an incremental
number.
1.
If you want to name your new song, proceed
with step (2).
If you are happy with the name suggested by the
BK-7m, simply press the [WRITE] button (see step (5)
below).
2.
Rotate the [CURSOR÷VALUE] dial to select a
different character, then press the dial to
confirm your selection.
3.
Rotate the [CURSOR÷VALUE] dial to select
the next character position you want to
change, then press the dial.
You can also press the ONE TOUCH [1] button to
delete the selected character, or the [2] button to
insert a character.
4.
Repeat steps (2) and (3) to complete the
name.
5.
Press the [WRITE] button (its indicator
flashes) to save your recording under the
new name and to return to the main page.
If the USB memory already contains a file of that
name, you will be asked whether you want to over-
write it:
In this case, select “YES” by first rotating the
[CURSOR÷VALUE] dial and then pressing it to replace
the old file with the new one (the old file will be lost).
Otherwise, select “NO” to return to the page where
you can change the name, and enter a different
name, the press the [WRITE] button.
When you press the [WRITE] button, your audio file is
saved to the “My Recordings” folder on the USB
memory.
BK-7m_UK.book Page 47 Tuesday, January 4, 2011 9:25 AM
To Next Page
Need help?
Power
Display and Sound
Weight and Dimensions
