Roland GO:KEYS 5 Reference Manual

41
Using a mic (GO:KEYS 5 only)
4.
Edit the settings.
Ø
“Selecting parameters and changing values” (p. 12)
Parameter Value Explanation
Type
DUET H.CLOSE
Adds an upper voice that’s close scale-
wise to the original sound.
DUET H.OPEN
Adds an upper voice that’s far apart
scale-wise from the original sound.
DUET L.CLOSE
Adds a lower voice that’s close scale-
wise to the original sound.
DUET L.OPEN
Adds a lower voice that’s far apart
scale-wise from the original sound.
TRIO
Adds an upper and a lower voice that
are close scale-wise to the original
sound.
QUINTET
Adds two upper voices and two lower
voices to the original sound.
COMBO
Adds two upper voices to the original
sound.
BLOCK
Adds three upper voices to the original
sound.
CLASSIC
Adds two or three upper voices to the
original sound.
Harmony Level 0–10 Adjusts the volume of the harmony.
Direct Level 0–10
Adjusts the volume of the original
sound
(the audio signal to which Mic
effects have not yet been applied)
.
Chorus Send 0–10
Adjusts the amount of signal sent to
the chorus effect.
Conguring the voice transformer
(Voice Trans Setting)
1.
Press the [mic eects] button.
The MIC EFFECTS screen appears.
2.
Use the dial to select “VOICE TRANS”.
3.
Press the [f4] (SETTING) button.
The Voice Trans Setting screen appears.
4.
Edit the settings.
Ø
“Selecting parameters and changing values” (p. 12)
Parameter Value Explanation
Pitch
-1, 0, +1
[octave]
Adjusts the pitch of the voice. You can
change the pitch up and down within a
range of one octave.
Parameter Value Explanation
Formant
-12–+12
[semitones]
Adjusts the formant of the voice.
Settings in the negative (–) direction
produce a more masculine vocal
character, and settings in the positive
(+) direction produce a more feminine
vocal character.
Robot Switch OFF, ON
Changes your voice to an uninflected
robotic voice with a fixed pitch.
Harmony Switch OFF, ON Turns the harmony on/off.
Harmony Type
DUET H.CLOSE
Adds an upper voice that’s close scale-
wise to the original sound.
DUET H.OPEN
Adds an upper voice that’s far apart
scale-wise from the original sound.
DUET L.CLOSE
Adds a lower voice that’s close scale-
wise to the original sound.
DUET L.OPEN
Adds a lower voice that’s far apart
scale-wise from the original sound.
TRIO
Adds an upper and a lower voice that
are close scale-wise to the original
sound.
COMBO
Adds two upper voices to the original
sound.
BLOCK
Adds three upper voices to the original
sound.
CLASSIC
Adds two or three upper voices to the
original sound.
Harmony Level 0–10 Adjusts the volume of the harmony.
Direct Level 0–10
Adjusts the volume of the original
sound
(the audio signal to which Mic
effects have not yet been applied)
.
Chorus Send 0–10
Adjusts the amount of signal sent to
the chorus effect.
Conguring the mic compressor
(Mic Comp Setting)
1.
Press the [mic eects] button.
The MIC EFFECTS screen appears.
2.
Press the [f2] (COMP) button.
The Mic Comp Setting screen appears.
3.
Edit the settings.
Ø
“Selecting parameters and changing values” (p. 12)
Parameter Value Explanation
Switch OFF, ON Turns the compressor on/off.
Type
SOFT, NORMAL,
HARD
Sets the strength of the effect that
suppresses the input sound level.
The effect increases in order of “SOFT”,
“NORMAL” and “HARD”.

Roland GO:KEYS 5 Specifications

General

Brand	Roland
Model	GO:KEYS 5
Category	Electronic Keyboard
Language	English