54
Editing the system settings
Conguring the system EQ (System EQ)
Use this to adjust the overall tonal character of the GO:KEYS.
You can set the Low, Mid and High bands separately to emphasize
or de-emphasize certain frequency ranges.
1.
On the System Menu screen, select “EQ” and press the
[enter] button.
The System>System EQ screen appears.
2.
Edit the settings.
Ø
“Selecting parameters and changing values” (p. 12)
Parameter Value Explanation
Switch OFF, ON
Sets whether to use the EQ
(ON) or not
(OFF).
Low Freq 20–400 [Hz]
Sets the center frequency of the low
range.
Low Gain -12–+12 [dB]
Adjusts the boost/cut of the low
frequency range.
Mid Freq 200–8000 [Hz]
Sets the center frequency of the mid-
frequency range.
Mid Q
0.5, 1.0, 2.0, 4.0,
8.0
Sets the bandwidth of the mid-
frequency range.
Higher values make the bandwidth
narrower.
Mid Gain -12–+12 [dB]
Adjusts the amount of boost/cut of the
mid-frequency range.
High Freq 2000–16000 [Hz]
Sets the center frequency of the high
range.
High Gain -12–+12 [dB]
Adjusts the boost/cut of the high
frequency range.
Adjusting the volume balance for the
parts
(Mixer)
1.
Press the [menu] button.
The Menu screen appears.
2.
Use the cursor [ÌÌ] [ÊÊ] buttons to select “Mixer”, and
press the [enter] button.
The mixer screen appears.
3.
Use the [f1]–[f4] buttons to select the part for which
you wish to change the volume.
Controller Part
[f1]
(KBD)
Keyboard part (UPPER/LOWER)
[f2]
(STYLE)
Style (auto-accompaniment)
[f3]
(SCENE)
Scene
[f4]
(AUDIO)
Audio songs
MEMO
The keyboard part, style, and scene volume are saved for each
scene.
4.
Use the dial to adjust the volume.
To Next Page
Loading...
Need help?
General
