30
Playing
Using the eects (TOTAL FX)
The TOTAL FX are eects that are applied to the overall sound
that’s output from the GO:KEYS.
1.
Press the [eects] button.
The TOTAL FX screen appears.
Selecting the total eects
1.
On the TOTAL FX screen, turn the dial to select an
eect.
These settings are common with the Type parameter on the Total
Fx Setting screen.
List of TOTAL FX
Effects Parameter page listing
SuperFilter
“06 SuperFilter” (p. 57)
Flanger
“20 Flanger” (p. 60)
Phaser
“13 Phaser” (p. 58)
Hexa-Chorus
“24 Hexa-Chorus” (p. 61)
Delay
“53 Delay” (p. 66)
Tape Echo
“61 Tape Echo” (p. 69)
Ring Mod
“30 Ring Mod” (p. 62)
PitchShiftr
“68 PitchShiftr” (p. 71)
Bit Crusher
“66 Bit Crusher” (p. 70)
Isolator
“04 Isolator” (p. 56)
LOFI Comp
“65 LOFI Comp” (p. 70)
Phonograph
“67 Phonograph” (p. 70)
Auto Pan
“32 Auto Pan” (p. 62)
Slicer
“33 Slicer” (p. 63)
Distortion
“37 Distortion” (p. 64)
Turning the total eects on/o
1.
On the TOTAL FX screen, press the [f1]
(ON/OFF)
button.
The setting toggles between on and o each time you press the [f1]
(ON/OFF) button.
Conguring the total eects (Total Fx Setting)
1.
On the TOTAL FX screen, press the [f4]
(SETTING)
button.
MEMO
You can also access this screen by long-pressing the [eects]
button.
2.
Edit the settings.
Parameter Value Explanation
Type
(Effect name)
Selects the effect.
Switch OFF, ON Switches the TOTAL FX on/off.
(Parameters for the selected Fx)
Ø
“Eects list” (p. 55)
Using reverb (REVERB)
Conguring the reverb
1.
Press the [eects] button.
The TOTAL FX screen appears.
2.
Press the [f3]
(REVERB)
button.
The Reverb screen appears.
3.
Edit the settings.
Ø
“Selecting parameters and changing values” (p. 12)
Parameter Value Explanation
Keyboard Send 0–127
This adjusts the depth of the reverb
that’s applied to the keyboard part.
Higher values produce more ambience,
and lower values produce less
ambience.
Type
STUDIO
This selects the reverb type.
*
The same reverb type is applied to the tone,
style and mic audio.
LOUNGE
CONCERT HALL
CATHEDRAL