Roland Jupiter-80 User Manual

Editing a Synth Tone
68
Saving a Synth Tone
A Synth Tone you edit is temporary; it will be lost if you turn o
the power or select another tone. If you want to keep a Synth Tone
you’ve edited, you must save it.
NOTE
When you save, the data in the save destination will be
overwritten.
1. In the Synth Tone Edit screen (p. 33), touch <TONE WRITE>.
The Tone Write screen will appear.
2. If you want to select the save-destination SuperNATURAL
Synth Tone number, touch <Write Destination>.
MEMO
You can also change the write destination by moving the cursor
to Write Destination and using the value dial or the [DEC] [INC]
buttons.
3. Touch the save-destination SuperNATURAL Synth Tone
number, and then touch <Select>.
4. Touch <WRITE>.
A message will ask “Are you sure?”
5. To save the Tone, touch <OK>.
A message will indicate “Completed!”
The Synth Tone has been saved in the save-destination
SuperNATURAL Synth Tone number you specied.
NOTE
Never turn o the power while data is being saved.
Naming a Tone
If you want to rename the Tone, touch <RENAME> of step 2.
The TONE NAME screen will appear.
For details on assigning a name, refer to “Assigning a Name”
(p. 29).

Roland Jupiter-80 Specifications

General

Pitch wheel	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Reverberation
Keyboard number of keys	76
Maximum polyphony (notes)	256
Headphone outputs	1
USB ports quantity	2
6.35 mm (1⁄4-inch) output	6
Display type	LCD
Power source type	AC

Weight and Dimensions

Depth	439 mm
Width	1231 mm
Height	140 mm
Weight	17700 g