47
Performing Multi-track Recording
Saving/Recalling Settings
You can save and call up assignments during recording or playback in the library of the R-1000. You can save up to 99 settings.
The R-1000 has five preset libraries (P01 through P05) and 99 user libraries (U01 through U99). Settings can be saved only in user libraries. Preset
libraries cannot be edited.
1. Make the settings to the state you want to save.
Assign input channels to recording tracks and make all other settings you want to save.
2. Change to the library screen.
Touching [Lib] at the [TRACK INPUT] or [TRACK OUTPUT] screen makes the display change to the library screen.
fig.call-library-screen.eps
3. Select the number to save to.
Select one of the user libraries from U01 to U99 as the number of the destination for saving. Selecting [Store] makes the display
change to a confirmation screen.
* P01 through P05 cannot be selected as destinations for saving.
fig.select-user-library.eps
4. Save the settings.
Touching [Store] at the confirmation screen saves the current settings.
fig.store-setting.eps
5. Call up saved settings.
Going to the library screen and touching the number you want to call up and then touching [Recall] makes the display change to
a confirmation screen for recalling. Touching [Recall] at the confirmation screen lets you call up the settings you have saved in
that user library.
* The procedure for calling up preset libraries P01 through P05 is the same.
To Next Page
Loading...
Need help?
General
