Layered Print (Metallic Silver CMYKLcLm)
This section describes how to perform the layered print with the metallic silver ink and CMYKLcLm ink using
the metallic silver ink as background.
P. 18, "Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk)"
To perform the layered print, you need to use the printing data where the use of the metallic silver ink and
the CMYKLcLm ink is designated.
P. 12, "2-3 Creating Printing Data"
(Image of printing method)
Procedure
Make sure that you have nished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( P. 9, "Chapter 2 Getting Ready").
Double-click .
"Queue A Properties" window appears.
The metallic silver ink and the CMYKLcLm ink are separated into the differ-
ent layers and printed in that order. (Metallic silver ink CMYKLcLm ink)
Media
Metallic Silver
CMYKLcLm
The printed
image is to be
seen from this
side (the printed
surface of the
nished results).
VS-640i_USE2_EN_R1.indb 28 2013/07/23 19:00:27
To Next Page
Loading...
Need help?
General
