Roland VS-540i - Print Job Setting: Equipped with White Only; Printing Only with White Ink

47
Chapter 3 Printing
3-4 Print Job Setting : Equipped with White Only
Printing Only with White Ink
This section describes how to perform printing only with the white ink. To use the while ink in printing, you
need to use the printing data where the use of the white ink is designated. If the printing data have the portion
designating the use of other colors, with the setting described in this section, you can print with the white ink
only the area of the image which has been designated to print with the white ink.
 P. 12, "2-3 Creating Printing Data"
Procedure

Make sure that you have nished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( P. 9, "Chapter 2 Getting Ready").

Double-click .
"Queue A Properties" window appears.

Click .
For [Media Type], select "Generic Clear
Film."

For high print quality:
For [Print Quality], select [High Quality].
For [Resolution], select [720x1440dpi].
[Mode] is set to [White (v)].
For standard print quality:
For [Print Quality], select [Standard].
For [Mode], select [White (v)].
VS-640i_USE2_EN_R1.indb 47 2013/07/23 19:00:30