4-2 Maintenance
Message for Ink Circulation
With this machine, white ink and metallic silver ink are circulated periodically to prevent the ink precipitation.
When the following message appears, please wait until the display changes.
[CIRCULATING INK]
In order to allow the automatic maintenance such as above to be performed, please observe the items below.
Leave the main power on at all times.
Never leave the front cover open for long periods.
After making the settings for the various menu items, go back to the top screen.
When Dot Drop-out Etc. Cannot be Corrected
When using metallic silver ink and white ink, ink discharge may become unstable (resulting in dot drop-out,
etc.) if the machine is left unattended for a long period. This is due to the properties of metallic silver ink and
white ink containing ingredients which tend to settle and separate, which will cause the precipitated ingre-
dients to solidify when the machine is left unattended for a long period. In such cases, perform "ink renewal"
menu. For information on how to operate the "ink renewal" menu, refer to the User's Manual.
"User’s Manual" ("When Problems Such As Dot Drop-out are not cleared up")
If the problems, such as dot drop-out, cannot be corrected even after performing cleaning above, then contact
your authorized Roland DG Corp. dealer.
VS-640i_USE2_EN_R1.indb 62 2013/07/23 19:00:32
To Next Page
Loading...
Need help?
General
