USER'S AND
MAINTENANCE
MANUAL
01/31/2020
Air Compressor : D185T4F-DB
Copyright © 2014, ROTAIR S.P.A. - All rights reserved. This manual is intellectual property of ROTAIR S.P.A.
Its full or partial reproduction is forbidden under any form, on any support and by any means, without the
written authorization by ROTAIR S.P.A.
A device introduced into a control circuit and used to control the operation of the system (e.g.: position
sensors, manual control switches, relays, electro-magnetic control valves, manual control switches, relays,
electro-magnetic control valves)
1.1-13 SAFETY INTERLOCK
Mechanical, electrical, or other device whose purpose is to prevent the parts of the machinery from
operating in specified conditions (generally, until the guard is closed)
1.1-14 MANUFACTURER
Physical or legal person who designed and/or developed machinery or partly-completed machinery which
is subject of this directive and who is liable for the compliance of the machinery or partly-completed
machinery with this directive as related to its marketing with his/her name or brand or for personal use. In
absence of a manufacturer as defined above, the manufacturer shall be considered the physical or
juridical person who markets or puts into service machinery or partly-completed machinery.
1.2 Machinery Identification
The identification nameplate is attached to the air compressor chassis. This nameplate contains
the manufacturer's data, the denomination of the machinery, and the code and year of
manufacturing.
For any requests for spare parts or actions by our technicians, please refer to the data reported on the
nameplate, particularly the code number of the machinery, which must always be mentioned.
Figure 1.2-1 Nameplate of air compressor D185T4F-DB
1.1-12
CONTROL DEVICE
To Next Page
Loading...
Need help?
General
