microSD
Section 2H. Using the microSD Card 103
Transferring data directly to the microSD
The microSD card can be accessed and used just as
easily as any other communicating storage device.
1. From your Desktop, double-click My Computer >
Mobile Device > My Windows Mobile-Based Device >
Storage Card entry to display the folders and files
available on the internal microSD card.
2. Open a folder and begin the transfer process of
files for your computer to the internal card’s target
folder.
To remove the connection:
䊳 When you have finished transferring data, unplug
the USB cable from the device.
General Precautions
䢇 No driver installation is required for Windows 2000/
ME/XP users. If you use Windows 98 (or 98SE), you
will need to download and install the USB mass
storage driver from the Sprint Web site at
www.sprint.com.
䢇 To avoid loss of data, do not remove the USB cable,
the microSD card, or the battery while files are being
accessed or transferred.
䢇 Do not use your computer to change or edit folder or
file names on the microSD, and do not attempt to
transfer large amounts of data from the computer to
the microSD card. Doing so may cause the microSD
card to fail.
䢇 Do not turn off or restart your computer, or put it into
standby mode while using a mass storage device.
Doing so may result in loss or damage of data.
䢇 If you connect a mass storage device to a peripheral
device, the peripheral device may not work properly.
I325.book Page 103 Tuesday, December 11, 2007 11:23 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
