Device Basics
Section 2A. Device Basics 31
To exit Emergency mode:
1. Press to end a 911 call.
䡲 When calling a non-emergency number or
selecting the
Emergency call only option, you must
select
Yes to exit the Emergency call back mode.
To inactivate the Emergency call back mode:
1. Press to end a 911 call.
2. Call a non-emergency number
To select Emergency mode options:
1. Press to end a 911 call.
2. Press Menu ().
䡲 Call 911 to call 911.
䡲 Call 911: Speaker to call 911 in speakerphone
mode.
䡲 Exit Emergency to exit Emergency mode.
3. Select an option and press .
Enhanced 911 (E911) Information
This device features an embedded Global Positioning
System (GPS) chip necessary for utilizing E911
emergency location services where available.
When you place an emergency 911 call, the GPS
feature of your device seeks information to calculate
your approximate location. Depending on several
variables, including availability and access to satellite
signals, it may take up to 30 seconds or more to
determine and report your approximate location.
Tip
Press My Phone (left softkey) to display your phone
number during an emergency call.
Note
When you are in Emergency mode, you can exit only
from the options menu.
IMPORTANT
Always report your location to the 911 operator
when placing an emergency call.
Some
designated emergency call takers, known as
Public Safety Answering Points (PSAPs) may
not be equipped to receive GPS location
information from your device.
I325.book Page 31 Tuesday, December 11, 2007 11:23 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
