Sprint Service
Section 3A. Sprint Service Features: The Basics 155
To respond to an incoming call while you’re on a call:
䊳 Press . (This puts the first caller on hold and
answers the second call.)
To switch back to the first caller:
䊳 Press again.
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at
the same time. When using this feature, the normal
airtime rates will be charged for each of the two calls.
1. Enter a number you wish to call and press
.
2. Once you have established the first connection,
press
and wait for a dial tone.
(This puts the
first caller on hold and dials the second number.)
3. Dial the second number you wish to call and press
.
4. When you’ve connected to the second party, press
again to begin your three-way call
.
If one of the parties in the current call hangs up, you
and the remaining caller still remain connected.
If you initiated the call and are the first to hang up, all
other callers are disconnected.
Using Call Forwarding
Call Forwarding lets you forward all your incoming calls
to another phone number – even when your device is
turned off. You can continue to make calls from your
device when Call Forwarding is activated.
Tip
For those calls where you don’t want to be interrupted,
you can temporarily disable Call Waiting by pressing
*70 before placing your call. Call Waiting is
automatically reactivated once you end the call.
Note
You cannot forward your calls to an international
number.
I325.book Page 155 Tuesday, December 11, 2007 11:23 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
