124 Section 2J. Bluetooth
2.
Use either the thumbwheel or navigation key to
scroll down the My Information Manager page to
review the
Device Address Bluetooth uses for your
device.
Pairing Bluetooth Devices
Pairing Devices
The Bluetooth pairing process (bonding) allows you to
establish trusted connections between your device and
another Bluetooth device. When devices are paired, a
passcode is shared between devices, allowing for fast,
secure connections while bypassing the discovery and
authentication process.
To pair your phone with another Bluetooth device:
1. Confirm that Bluetooth is enabled. (See “Turning
Bluetooth On and Off” on page 119.)
2. Press Start > Settings > Connections > Bluetooth.
3. Select Add new device.. and press . (Your device
will display a list of discovered in-range Bluetooth
devices.)
4. Select a device and press Next (left softkey).
5. Use the keypad to enter a passcode and press
Next (left softkey). (An onscreen message will tell
you if the connection was made successfully. If the
connection failed, please confirm the device is
functioning correctly and repeat steps 3 and 4.)
6. Use the keypad and to enter a display name
for the Bluetooth device and press
Next (left
softkey).
Note
When pairing your device to other Bluetooth devices,
ensure that your device is not connected to your
computer via a USB cable.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
