106 Section 2I. Camera
䢇 Camera/Camcorder to toggle between camera and
camcorder.
䢇 Shooting Mode to select from the following image
capture options:
䡲 Single Shot, Multi Shot, Mosaic Shot, Frame Shot,
or Night Shot. (See “Taking Multiple Shots” on
page 106.)
䢇 Size to select a picture’s image size (1280x960,
640x480, or 320x240).
䢇 Timer to activate the camera’s timer. (See “Setting the
Self-timer” on page 106.)
䢇 White Balance to adjust white balance based on
changing conditions. Select from
Auto, Daylight, Cloudy,
Tungsten, or Fluorescent.
䢇 Effect to select a variety of color tones for the picture
(
No effects [default], Sepia, B/W, or Negative).
䢇 Help to view key functions in camera mode.
䢇 Settings to adjust General, Camera, and Camcorder
settings. (See “Adjusting Settings” on page 108.)
Setting the Self-timer
1. From camera mode, press Menu > Timer.
2. Highlight the length of delay you want the timer to
use (
2 Sec, 5 Sec, or 10 Sec) and press
.
3. Press to start the timer. (A numeric countdown
is displayed on the upper left portion of the display
screen.)
4. Get ready for the picture. (The device will make a
chirping sound just before taking the picture.)
To cancel the Self-timer after it has started:
䊳 Press .
Taking Multiple Shots
This feature allows you to take a series of continuous
shots. When you take multiple shots, thumbnails of
those images are displayed in the viewfinder. When
multiple shots are selected, the image size is
automatically set to
640 x 480.
Note
While the self-timer is active, all keys are disabled
except
Back, End, and Home.
I325.book Page 106 Tuesday, December 11, 2007 11:23 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
