Settings
Section 2B. Your Device’s Settings 49
Reviewing Your Voice mail Number
During the initial system setup, the device automatically
detected and set your voicemail number. If this field is
blank, you can manually enter the number obtained
from Sprint Customer Service.
Assigning an International Country Code
You can enter a frequently used country code that will
be entered when plus code dialing is used. The Plus
Code Dialing Key ( ) automatically dials the
international access code for the country in which you
are located.
This field allows you to prepend multiple dialing codes
to a number. This can be useful for long distance
dialing where the international prefix, country code, and
city code are already stored on the device.
To enable the International Country Code:
1. From standby mode, press Start > Settings > Call
Options > International code.
2. Use the keypad to enter an international country
code and press
Done (left softkey).
䡲 When using Plus Code Dialing, the international
code defaults to the code for the country you are
currently in, but when a value is entered in this
field, all international calls begin with this new
value. This new value supersedes the default
International code.
䡲 As an example, if this field contained: 01159399,
then whenever you pressed , these numbers
would appear onscreen and then you would
simply key in the local phone number.
3. Press Done (left softkey).
Note
Although this field is editable, it is not recommended
that this number be altered.
I325.book Page 49 Tuesday, December 11, 2007 11:23 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
