Security
Section 2C. Your Device’s Security 61
1. Press Start > Settings
>
More... > Security.
2. Select Device Lock and press .
3. Select “Prompt if device unused for” and press
. (Enabling this option activates the remaining
fields.)
4. Select each field and enter the required
information:
䡲 Time: select the amount of unused time (idle)
required before you are prompted for a password.
䡲 Password type: to choose from one of the following
PIN types:
● Simple PIN: must be at least four characters in
length and cannot contain a simple sequence
such as 000, 1111, or 1234.
● Strong alphanumeric: must be at least seven
characters in length and must contain at least
one character from each of the following
categories: uppercase/lowercase letters,
numerals, symbols. Examples of strong
alphanumeric passwords are
sb?8A!3 and
%$VH5hW.
䡲 Password: use the keypad to enter the desired
password.
䡲 Confirm password: use the keypad to re-enter the
same password.
5. Press Done (left softkey) > Yes (left softkey) to store
these settings.
Unlocking Your Device Using a Password
Once the preset time has expired, the display screen
will dim and the taskbar
Start option is replaced with
Unlock.
1. From standby mode, press Unlock.
2. Enter your password using the keypad.
3. Press Unlock.
Changing the Device Lock Code
1. Press Start > Settings
>
More... > Security.
2. Select Device Lock and press .
3. Enter your password using the keypad.
4. Press Unlock.
I325.book Page 61 Tuesday, December 11, 2007 11:23 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
