11
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric
shock may result.
3
Use water and a dry cloth to clean the protection glass.
Wipe with a clean wet cloth.
To remove tough stains, wipe using a cloth with a small amount of ethanol based cleaner.
Use a brush to remove any debris from the inlet and outlet opening.
To remove tough stains, wipe using a cloth with a small amount of ethanol based cleaner.
If washing with water, keep the pressure below 0.5 bar.
4
Connect the power cord to the product when cleaning is finished.
5
Power on the product and computer.
Storage
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create white-
colored stains on the product.
Contact Customer Service Center if the inside of the product needs cleaning (service fee will be charged).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
