English_27
TURNING THE SCREEN INDICATORS ON/OFF (
)
Switching the information display mode
You can switch the display mode of on-screen information:
Press the
button while the camcorder is on.
The full and minimum display modes will alternate.
Full display mode: All types of information will appear.
Minimum display mode: Only the operating status indicator will appear.
Checking the remaining battery and memory capacity
Without turning the camcorder on,you can check the remaining battery time
and memory capacity.
When the camcorder is turned off (battery is installed) press and release the
button to display the remaining capacity of the battery.
When the camcorder is turned on (battery is installed) press and hold the
button for more than 2-3 seconds to display the remaining
battery capacity.
The approximate recordable time in the selected storage and
the battery information appear for about 10 seconds.
Selected storage media is indicated in green, and "No Card" appears if there
is no memory card is inserted.
Pressing the button or any other button in battery information screen
will return to the previous screen.
•
•
•
•
•
•
•
If the memory camcorder has warning information, a warning message
will appear.
Battery information is only available if the battery is inserted.
While connected to AC adaptor without battery inserted, "No Battery"
message appears.
It also displays cautions and notices according to the state.
button does not operate in menu and quick menu screen.
•
•
•
To Next Page
Loading...
Need help?
General
Weight and Dimensions
