156
Setting the Time and Using the Timer
Setting the Current Time
MENU > System > Time > Clock
Try Now
Set the clock manually or automatically.
To view the time after the clock is set, press the INFO button on your remote.
–
LED 7100 series : To view the time after the clock is set, select the INFO button on the On-
Screen Remote. (KEYPAD > INFO)
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
MENU > System > Time > Clock > Clock Mode
Try Now
Set Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel. To
enable this option, the TV's Antenna jack must be connected to either an antenna or a cable output
and must be receiving digital broadcasts. The accuracy of the time information received may vary
depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using
HDMI or Component connections, you must set the time manually.
General
To Next Page
Loading...
Need help?
General