Remote Control
Part Names and Functions
LIGHT button
Lights the buttons on the remote control for about 10 seconds.
G
MENU button
Opens or closes the On-Screen MENU. (pp.26, 27)
L POINT ! buttons
–Select an item or adjust the value in the ON-SCREEN MENU. (p.26)
–Pan the image in DIGITAL ZOOM +/– mode. (p.45)
H
LENS SHIFT button
Selects the LENS SHIFT function. (p.29)
FOCUS buttons
Adjusts the focus. (p.29)
<
ZOOM buttons
Zoom in and out the images. (p.29)
FREEZE button
Freezes the picture on the screen. (p.31)
P-TIMER button
Operates the P-TIMER function. (pp.31, 69)
KEYSTONE button
Corrects keystone distortion. (pp.32, 46, 53)
D
STAND-BY button
Turns the projector off. (p.25)
AUTO PC button
Automatically adjusts the computer image to its optimum setting.
(pp.29, 37)
E
SHUTTER button
Close
s
the built-in shutter for light blocking. (pp.28, 29)
SELECT
button
–Executes the selected item. (p.26)
–Expands or compress the image in the DIGITAL ZOOM +/-mode.
(p.45)
IMAGE SEL. button
Selects the image level. (pp.31, 40, 48)
INPUT 1, 2, 3, and 4
button
s
Select an input source. (pp.33-35)
IMAGE ADJUST button
Enters the image level adjustment mode. (pp.29, 41-43, 49-51)
INFO. button
Displays the input source information. (p.29)
SCREEN button
Selects the screen size. (pp.44-46, 52-53)
BD.ZOOM
button
Selects the Digital zoom +/- mode and resize the image. (pp.29, 45)
14
FILTER button
To schedule a filter cleaning task. (p.31)
PIP button
Operates the Picture In Picture function. (p.31)
8
ON button
Turns the projector on. (p.24)
J
SIGNAL EMISSION indicator
Lights red while a signal is being sent from the remote control unit
to the projector.
ON/OFF switch
When using the remote control, set this switch to “ON”.
Wired Remote Jack
Connects the remote control cable (not supplied) to this jack
when using as a wired remote control.
D
G
8
E
H
L
<
J
B
Number buttons
Use these buttons when setting the remote control codes (p.16)
or when entering the PIN code numbers (pp. 24, 61, 65).
To Next Page
Loading...
Need help?
General
