41
Image Adjust Menu
Press the MENU button to display the On-Screen
Menu. Use the Point ! buttons to select Image
adjust and then press the Point or the SELECT
button.
1
2
Use the Point ! buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point
buttons to
adjust the setting value.
Press the Point button to decrease the contrast; press the
Point
button to increase the contrast (from 0 to 63).
Press the Point button to decrease the brightness; press
the Point
button to increase the brightness (from 0 to 63).
Use the Point buttons
to adjust the setting value.
Selected Image mode
Image Adjustment
Computer Input
The Color Management function can be used to adjust the LEVEL,
PHASE, and GAMMA of the selected display colors (except for
black, white, and gray) on the screen and replace these colors with
other colors if required.
You can store up to eight (8) color management data.
1
Select and highlight Color Management by using the Point
! buttons and press the SELECT button. The projected
image freezes, and the COLOR MANAGEMENT POINTER
appears.
Use the Point ! buttons to move the pointer to the
spot where you want to adjust the color and then press the
SELECT button. The COLOR SELECTION window appears,
and the color in the center of the pointer is selected and you
can adjust the color.
2
Use the Point ! buttons to adjust the LEVEL and
PHASE of the color, and then press the SELECT button to
confirm the setting. Then use the Point ! buttons to adjust
the GAMMA for the color and press the SELECT button to
accept the setting. After adjusting, press the SELECT button
to go to the COLOR MANAGEMENT LIST.
3
COLOR SELECTION MODE
Go to the COLOR MANAGEMENT LIST.
LIST
Return to the COLOR MANAGEMENT POINTER. (If you press
the MENU button on the side control or the remote control ,
it returns to the COLOR MANAGEMENT POINTER and you
will need to reselect and readjust the color.)
COLOR M.
COLOR MANAGEMENT
POINTER
POINTER MODE
Note
When White balance Red, Green or Blue is adjusted,
Color temp. will change to Adj.
Contrast
Brightness
Color management
To Next Page
Loading...
Need help?
General
