Sanyo PLC-HF15000L User Manual

86
Appendix
Indicators and Projector Condition
Check the indicators for the projector condition.
The projector is operating normally.
• • • on
• • • off
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • • dim
• • • blinking slowly
(approx. 2 seconds ON,
2 seconds OFF)
• • •blinking fast (approx.
0.5 seconds ON, 0.5
seconds OFF)
Indicators
Projector Condition
POWER
green
LAMP
red
WARNING
TEMP.
red
WARNING
FILTER
orange
SHUTTER
blue
LAMP
REP.
orange
The projector is off. (The main On/Off switch is OFF
position or the AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
STAND-BY button to turn on the projector.
The projector is operating normally.
(The Shutter is open)
The projector is operating normally.
(The Shutter is closed)
The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector
cannot be turned on until cooling is completed and
the POWER indicator lights green.
The projection lamp is being cooled down in the
Power management mode.
The projector is in the Power management mode.
The projection lamp is being cooled down in the
Shutter management mode.
The projector is in the Shutter management mode.
Press the ON/STAND-BY button to turn on the
projector.
The projector is cleaning the filter.
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
• • • Differs according to conditions.
=
• • • blinking slowly
(approx. 1 second ON,
5 seconds OFF)

Sanyo PLC-HF15000L Specifications

General

Brand	Sanyo
Model	PLC-HF15000L
Category	Projector
Language	English