60
Setting the Date Stamp
The date of recording can be printed directly on the still
images. This function must be activated before the image
is captured. Once date and time are stamped on an image,
they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
• Available for still images only.
• May slow down AEB/ Burst shooting when Date
Stamp is enabled in AEB/ Burst mode.
• In vertical or rotated images, the date and time on
your images still appear horizontally.
To set Date Stamp
1. From the Record menu, tap Date Stamp.
2. Tap the desired option button to apply.
Setting Auto Review
The Auto Review function lets you view the captured image right after shooting it. If Auto review is
enabled, the camera will display the captured image for 1 second in the LCD monitor.
To set Auto Review
1. From the Record menu, tap Auto Review.
2. Tap On/Off to enable/disable Auto review.
To Next Page
Loading...
Need help?
General
