75
Red-eye Correction
The function is used to reduce red eye in captured images. This function is only available for still
images. Red eye correction can be applied to an image several times, but the quality may gradually
deteriorate.
To activate Red Eye Correction:
1. Set the camera to Playback mode and locate the
desired image by single navigation.
2. Tap the onscreen Menu button to launch playback
menu and tap Red-eye Correction.
3. Tap the onscreen Start button to popup confirm
menu.
4. Tap Yes to save the corrected image as a new one,
Cancel to abort.
5. Repeat step 2 to 4 to enhance the correction, if
necessary.
Perspective Control
You may have noticed that buildings look as though they are thinner at the top when you shoot from
a low viewpoint, also a road disappearing into the distance. All these are result of perspective
distortion and all affected by the angle of view and focusing point. Perspective Control a
llows you to
make areas thicker or narrower to correct
these distortions.
To use Perspective Control:
1. Set the camera to Playback mode and locate the desired image by single navigation.
2. Tap the onscreen Menu button to launch playback menu and tap Perspective Control.
3. Tap the or button once or more to correct distorted image until the subject in
the image is straight and in correct size.
4. Tap the
button to popup confirm menu.
5. Tap YES to save corrected image as a new image, Cancel to abort.
The camera allows applying this feature up to 10 times in the same perspective
angle to an image.
To Next Page
Loading...
Need help?
General
