English
110
USB FUNCTION SETTING
Perform the USB setting when the dedicated USB interface cable is used to
connect your camera to another device. Two modes are available for the USB
connection function. The PC connection mode is selected when the camera is
connected to a computer and used as a card reader. Select the PictBridge
mode when the camera is connected to a printer.
1
Display the Option Setting Screen
(page 105).
2
Select the USB setting icon ;,
and press the SET button.
e The USB Setting Screen appears.
CARD READER:
PC connection mode setting (page
129)
PICTBRIDGE:
PictBridge mode setting (page 139)
3
Select the correct mode for your
purpose, and press the SET button.
Note
e When the CARD READER mode is set and the camera is connected to a
computer, the multi-indicator lights green.
e When the PICTBRIDGE mode is set and the camera is connected to a
printer, the multi-indicator lights red.
CARD READER
PICTBRIDGE
USB SETTING
* !"#
To Next Page
Loading...
Need help?
General