Sanyo Xacti VPC-C1 User Manual

111
English
FILE NO. RESET FUNCTION
If a reformatted card is used, the file name (image number) of the captured
image automatically begins from 0001. If the card is subsequently reformatted,
or if a different reformatted card is used, the file names again begin from 0001.
This is because the file number reset function is set to ON, and consequently it
results in more than one card containing images with the same numbers. By
setting the file number reset function to OFF, even if the card is reformatted or
the card is replaced with another card, the consecutive numbering of file names
continues from the last number recorded by the camera.
<File number reset function ON>
<File number reset function OFF>
File name (image number)
Card A
0001, 0002 ...... 0012, 0013
Replace card
Card B
0001, 0002 ...... 0012, 0013
File name (image number)
Card A
0001, 0002 ...... 0012, 0013
Replace card
Card B
00014, 00015 ..... 0025, 0026
      !"#

Sanyo Xacti VPC-C1 Specifications

General

Brand	Sanyo
Model	Xacti VPC-C1
Category	Camcorder
Language	English