Sanyo Xacti VPC-C1 User Manual

157
English
TROUBLESHOOTING
Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
CAMERA
Problem Cause Action
Refer-
ence
page
Power
No power. The battery pack is
dead.
Recharge the battery
pack, or replace with
a new battery pack.
34,
35
The battery pack
has not been
inserted correctly.
Reinsert the battery
pack, making sure to
orient it correctly.
The camera
turns off by
itself.
The power save
function is
operating.
Press one of the
operation buttons
once.
38
The camera is
set in the
docking station,
but it does not
recharge.
If a battery pack is
set in the AC adapter/
charger, the battery
pack in the AC
adapter/charger is
recharged first, after
which the battery
pack in the camera
starts to recharge. To
speed up recharging
of a battery pack, set
it in the AC adapter/
charger.
—
 &'     !"#

Sanyo Xacti VPC-C1 Specifications

General

Brand	Sanyo
Model	Xacti VPC-C1
Category	Camcorder
Language	English