English
122
FORMATTING A CARD
The supplied card must be formatted with this camera. In addition, a card must
be formatted with this camera:
• After purchasing, when used for the first time, or
• If it was formatted using a personal computer or another digital camera.
The card cannot be reformatted if the lock switch is set to the “LOCK” position.
Proceed with the reformat procedure after setting the lock switch to the
unlocked position (page 26).
1
Display the Option Setting Screen
(page 105).
2
Select the reformat icon 1, and
press the SET button.
e The Reformat Screen appears.
e In normal use, a total format is not
necessary. However, in case a
card error occurs even after normal
formatting, executing a total
reformat may resolve the problem.
FORMAT:
A normal reformatting is executed.
FULL FORMAT:
The entire card is scanned and
reformatted. (When there is little
battery power remaining, this
setting cannot be selected.)
FORMAT
FORMAT
FULL FORMAT
EXIT
$$ !"#
To Next Page
Loading...
Need help?
General