When the speed control lever
is
pulled fully toward the operator, the
engine speed reaches the maximum of 2,750 rpm.
The rated speed
of
the Engine Model KE-130-138
is
2,500 rpm. This
engine speed
is
not only the most appropriate one to get the longest service
life from
your
tractor
but
also the most economical one. It
is
the best
therefore, to run the engine
at
the rate
of
2,500 rpm.
The foot
throttle
pedal
is
installed on the right side
of
the step. When
the
hand
throttle
lever
is
in
the
idling position,
the
engine can be controlled
to be at any speed within
the
range by depressing the pedal.
NOTE:---------------------------------------------
When
the
hand
throttle
lever
is
in
a high rev. position,
the
foot
throttle
also moves into
the
position for those revs. When this
is
done the revo-
lutions cannot be controlled by means
of
the
foot
pedal within
the
range
below
the
revs. set by hand lever.
Depress the clutch pedal fully
to
bring the machine
to
a complete
halt when shifting
the
gear
in
the
transmission for changing the machine
propelling speed. For shifting
the
P.T.O. gears, follow
the
similar manner.
Lowering
the
speed, when
the
tractor
is
overloaded, by half engaging
the
clutch or changing gear at high speed will damage
the
clutch lining.
-
12-
To Next Page
Loading...
Need help?
General
