•
Carry
out
as
follows along with DAILY INSPECTION, A-SERVICE and
B-SERVICE.
1. Checking injection nozzle
Checking
the
nozzle condition and injection pressure.
2. Replacing
the
transmission case oil
3. Washing the hydraulic oil filter
4. Replacing
the
oil
in
the
front axle differential case and
the
front gear
case
of
the 4-wheel drive
tractor
5. Check
the
rear axle housing case oil.
Carry
out
as
follows at
the
same time
as
DAI
L Y INSPECTION,
A-SERVICE, B-SERVICE and C-SERVICE.
1. Replace
the
rear axle housing case oil.
2. Repl ace
the
ai
r cleaner element.
The element
is
usually replaced every
600
hours,
but,
for different
operating conditions, judge the timing
of
the repl acement by inspect-
ing
the
element.
3. Replace
the
cool
ing
water.
4. Clean
the
outside
of
the
rad iator.
-31-
To Next Page
Loading...
Need help?
General
