satoh BULL S-630 User Manual

.,
.
Loosen the air vent screw of the fuel pump to let the fuel to overflow.
When no more air bubbles in the fuel, tighten the screw.
Loosen the nut of the nozzle and shift the th rottle lever to the high speed
position. Then, start the engine and make sure the fuel is discharged
properly at the loosened nozzle connection. Tighten the nut to the spec-
ified
torque.
Start the engine according to the steps covered by "Starting the Engine".
NOTE:----------------------------------------------
Unless air is completely bled, the engine can not be started; in such a
case,
perform air bleeding again to let remaining air completely out of
the system .
Remove the plug of the engine oil pan and completely drain the used oil.
Supply the specified oil up to the specified level. It should be noted that
dirty oil is more easily discharged when it is warm.
Replacing engine oil should be carried out while the tractor is placed hor-
izontally.
-37 -

satoh BULL S-630 Specifications

General

Brand	satoh
Model	BULL S-630
Category	Tractor
Language	English