satoh BULL S-630 User Manual

NOTES:-------------------------------------------
1) When any implement is towed by the tractor, care should be taken
so that the universal joint does not form an angle more than 15°.
2) When the tractor is working with an impact load, correctly adjust
the slide clutch on the implement side so that the P.T.D. is not over-
loaded.
3) To reduce the thrust load to the P.T.D. driven shaft as much as
possible, it
is advisable to test operation with an implement without
any load.
4) Lubricate the P.T.D. driven shaft weJI.
5) Avoid using a
square-shaped drive shaft as much as possible.
6) Special care should be given to the yoke position so that the driven
shaft is well balanced.
Correct Incorrect
The 4-wheel drive shift lever is located on the left of the transmission
case and it should be operated in the similar manner 1O that for the
machine and P.T.D. speed shift levers.
- 17-

satoh BULL S-630 Specifications

General

Brand	satoh
Model	BULL S-630
Category	Tractor
Language	English