satoh BULL S-630 User Manual

Position the piston in No.1 cylinder at top dead center on compression
stroke and adjust its intake and exhaust valve clearance.
-Then rotate the crankshaft 360
0
clockwise to move the piston of
No.2 cyl inder to top dead center on compression stroke, and adjust its
valve clearance.
Soft water must be used for cooling except when antifreeze or antirust
agents are used. Make sure that the hose joint is firmly tightened so that
there is no water leakage. The front of the radiator is provided with
screen to prevent dust from entering. After working' in dusty pi aces
cleaning
is required.
-40 -

satoh BULL S-630 Specifications

General

Brand	satoh
Model	BULL S-630
Category	Tractor
Language	English