satoh BULL S-630 User Manual

The hydraulic system of the SATOH tractor is adjusted and tested before
it leaves
the factory and needs no more adjustment in the field. Should
it, however, show unsatisfactory operation, adjust it
in the following
manner:
oln case
the safety valve is operated all the times.
SI ide the stopper forward to be set at such a position that the valve can
not be actuated even with the control lever shifted
to the full "lift"
position. No adjustment is required for lowering operation.
°0 /
~ /
\;(/
'O,o~1\I
TO CONTROL VALVE
"0" RING
BALL
SPRING
Remove the pivot screw lock nut and then the lever stopper. Turn the
pivot screw clockwise about 3 turns, start the engine and lift the
implement. Then, stop
the engine and shift the hydraulic control lever to
the lowering position. Under this condition, make sure the implement is
firmly locked. (If the implement lowers, turn the pivot screw clockwise
-51-

satoh BULL S-630 Specifications

General

Brand	satoh
Model	BULL S-630
Category	Tractor
Language	English