44
SCClub operating instructions
Software
Filling quantity, animation cup tray,
multiple brewing and dosing type
Filling quantity
Set the desired lling quantity. The recipe is adjusted
appropriately.
100% corresponds to the previously saved value.
Animation cup tray
The “animation cup tray” is displayed after the
beverage selection, if it was previously activated
under “lling quantity” per beverage. Check the check
mark in the “animation cup tray” eld.
Procedure for beverage dispensing:
* Press the desired beverage button
The animation is shown on the display.
* Conrm with the green check mark
* The beverage is dispensed
S-M-L lling quantity
Display only if the S-M-L function is activated in the
system. The recipes are generated for the sizes S
and L. M is as set (medium).
The standard values are:
S = 25% less than M
L = 25% more than M
S-M-L function
The S-M-L function can be activated in the System
menu. A deviation from the standard lling quantity
can also be changed in general for all beverages
under System.
The S-M-L quantities must be changed under Filling
quantity (beverage settings) for deviating individual
beverages.
Every size can be individually set to active or inactive.
Inactive means the size cannot be selected for this
beverage in this case (remove check mark for each
size to do this). Then save.
%
S-active Active L-active
72
73
74
75
76
77
78
97
98
99
100
101
102
103
122
123
124
125
126
127
128
Changing S-M-L for individual
beverages
w Filling quantity
Activating S-M-L and changing
generally for all beverages
w System
w S-M-L
page 66
Operation
w Special buttons
w page 26
To Next Page
Loading...
Need help?
General
