69
SCClub operating instructions
Other settings
6 Other settings
6.1 Setting the grind level
Risk of trapping/Risk of injury
• The coee grinder contains moving parts
which could injure ngers.
> Never reach into the grinders while the
coee machine is running and the product
hoppers have been removed.
Finer setting of grind level
• Making a big change to a ner grind level
can block the coee grinder.
> Only set the grind level ner with one
revolution with the multi-tool.
> Then dispense a coee beverage using the
ner grinder setting.
> Repeat this step until the desired grind level
is set.
Coarser setting of grind level
A change to a coarser grind level can only be
set once.
* Initiate coee dispensing and wait until the grinder
starts up.
* Adjust the grinding level as required using the
multi-tool while the mill is running.
Grind level ne
Grind level
coarse
CAUTION
Observe the Safety chapter
w from page 9
IMPORTANT
Observe the Warranty chapter
w from page 106
Multi-tool
To Next Page
Loading...
Need help?
General
