88
SCClub operating instructions
Care
7.6.10 Cleaning the mixer
Clean more often depending on the powder used.
* Carry out a mixer rinse
* Open the doors
* Pull the mixing bowl forwards with the handle
* Lift the mixing bowl slightly so that any remaining
water runs out
* Pull o the mixer hose, from the mixing bowl to the
outlet, and take it out of the guide
The mixer’s propeller is now visible.
* Clean the propeller with a cloth
* Disassemble the two-part mixing bowl
* Clean both mixing bowl parts and the mixer hose
under warm, running drinking water
* Let the parts dry fully
At the time of reassembly, all openings must point in
the same direction
* Insert the mixer hose into the outlet through the
guide
* Reinsert the mixing bowl until it engages
* Attach the mixer hose to the mixing bowl
Danger of scalding
• If the mixer hose is not rmly connected,
hot water or hot powder-based beverage
can escape unintentionally.
> Attach the mixer hose to the mixing bowl.
Animated instructions
w Coee machine
w Main menu
w Care
w Instructions
CAUTION
Observe the Safety chapter
w from page 9
To Next Page
Loading...
Need help?
General
