User manual SCA - EN
Version 02 09.2006
Operation www.schaerer.com
13
Adjusting outlet height
Adjust the outlets to the correct height before dispensing any beverages!
If a beverage has already been dispensed, the outlet may be warm!
There is a risk of squeezing ngers when moving the outlet!
1. Grip the front of the outlet and move it to the desired position
(see picture).
Adjustable tray height:
65 - 185 mm
Beverage output
All beverages dispensed from the machine are hot!
Do not reach under the outlet while a beverage is being dispensed!
Preparing coffee beverages
1. Place a cup under the outlet.
2. Move the outlet to the correct position.
3. Press desired beverage button (LED next to the pressed button blinks green).
4. After the beverage has been dispensed (LED next to the pressed button stopps to blink),
remove the cup.
The machine has two possible product layers for each button (if programmed).
To enter the second product level press the SHIFT button before the product selection.
Preparing milk beverages
If programmed, milk beverages can also be dispensed using the beverage buttons.
Available beverages:
• Cappuccino
• Latte Macchiato
• Latte
• Hot milk and milk foam
Connecting milk supply
No more than 40 cm should be between the package of milk and the outlet.
The milk tubes must touch the bottom of the container!
Milk that has already been warmed or that has exceeded its expiry date will not produce milk
foam!
Comply with all hygiene regulations according to HACCP (see "Hygiene", page 47)!
To Next Page
Loading...
Need help?
General
