SICK deTec4 C4C-EV03030A10000 User Manual

5 Mounting
5.1 Safety
Important information
DANGER
H
azard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.
b
Only use the sender and receiver of the deTec4 Core Vibes safety light curtain with
each other. Do not use the sender or receiver of the deTec4 Core Vibes safety light
curtain with components from another safety light curtain or with components
from another safety light curtain of the deTec product family.
b
Only use the brackets described in this document.
b
Take appropriate measures for vibration damping if vibration and shock specifi‐
cations exceed the values and test conditions specified in the data sheet, see
"Technical data", page 51.
Further topics
•
"D
esign", page 15
•
"Technical data", page 51
5.2 Unpacking
Approach
1.
Check the components for completeness and the integrity of all parts.
2. In the event of complaints, contact the responsible SICK subsidiary.
Further topics
•
"Or
dering information", page 57
5.3 Installation
Important information
DANGER
H
azard due to lack of effectiveness of the protective device
Persons or parts of the body to be protected may not be recognized or not recognized in
time in case of non-observance.
b
Observe the calculated minimum distances for the machine in which the safety
light curtain is integrated.
b
Then, mount the safety light curtain such that it is not possible to reach over,
under or around, or to stand behind the safety light curtain, and that the light
curtain cannot be repositioned.
5 MOUNTING
32
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Vibes 8024467/1GWF/2022-11-11 | SICK
Subject to change without notice

SICK deTec4 C4C-EV03030A10000 Specifications

General

Brand	SICK
Model	deTec4 C4C-EV03030A10000
Category	Accessories
Language	English