Siemens SD 270 User Manual

12
Safety Note!
For connected parts marked * only connect the accessories
supplied with the instrument. These parts have been tested
for use with the Siemens SD 270 Diagnostic Audiometer for
compliance with the standards IEC 60601-1 and
IEC 60601-1-2.
The use of accessories other than those specified may
compromise compliance with these standards. For other
sockets refer to Appendix 4.
2.5 Data transfer to a printer
Safety Note!
Please refer to Appendix 4 for important information regar-
ding the connection of non-medical electrical equipment to
medical electrical equipment.
The audiometer can be upgraded with an option to allow
connection to a designated portable thermal printer for printing
air conduction, bone conduction, speech and ULL test results
(see 3.11). You must use the designated cable which is supplied
with this option.
Upon receipt of the printer it is recommended that the printer is ini-
tially charged for a minimum of 15 hours prior to use.

Siemens SD 270 Specifications

General

Brand	Siemens
Model	SD 270
Category	Measuring Instruments
Language	English