31
3.8 Uncomfortable loudness levels
If it is required to record uncomfortable loudness levels (ULL) then
pressing Softkey 4 with Air conduction selected will enable this
function. The display will be similar to that shown below, and ULL
thresholds are stored and retrieved as described in Section 3.7.
3.9 Saving audiograms in internal memory
The user may store up to 12 audiograms, referenced by number, in
the internal memory of the audiometer. To save the current set of
audiogram thresholds press the OPTIONS key, press the NEXT key
repeatedly until “Save Audiogram to ” appears on screen. Use the
UP key to select a location numbered 1-12, then press the SAVE key.
Any results for ULL thresholds or speech testing (see Appendix 1)
will also be saved.
Note that the Save process will overwrite any records that exist in
the memory location. Press the QUIT key once confirmation that
the thresholds have been saved appears on the screen.
To Next Page
Loading...
Need help?
General
