Siemens SIMATIC ET 200SP HA User Manual

Preface
2
Validity of the documentation
This equipment manual describes the F-AI 8xI 2-/4-wire HART HA I/O module with part number
6DL1 136-6AA00-0PH1.
It supplements the system manual "Distributed I/O System ET 200SP HA (
https://
support.industry.siemens.com/cs/de/en/view/109781000)".
Functions that generally relate to the system are described in this manual.
The information in this manual and in the system and function manuals enables you to
commission the ET 200SP HA.
You can 󹪝nd additional information in the programming and operating manual "SIMATIC
Industrial Software S7 F/FH Systems - Con󹪝guring and Programming (https://
support.industry.siemens.com/cs/ww/en/view/109773062)
Conventions
Please also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product and on the section of the documentation to which particular attention
should be paid.
F-AI 8xI 2-/4-wire HART HA
Equipment Manual, 09/2021, A5E50557845-AA 9

Siemens SIMATIC ET 200SP HA Specifications

General

Category	I/O Systems
System	SIMATIC ET 200SP HA
Mounting	DIN rail
Protection Rating	IP20
Communication Protocol	PROFINET
Redundancy	Yes
Hot Swapping	Yes
Modularity	Modular
Power Supply	24 V DC
Temperature Range	-40 to 70 °C
Product Type	Distributed I/O
Number of I/O modules	Up to 64
Redundancy Type	system redundancy
Operating Temperature	-40 to 70 °C
Storage Temperature	-40 to 70 °C
Relative Humidity	5% to 95% (non-condensing)
Vibration Resistance	IEC 60068-2-6
Shock Resistance	According to IEC 60068-2-27
Mounting Type	DIN rail